Description
The RFID reader allows solving problems such as identification of characters of drivers and attachments. Based on it, various scenarios can be created: engine blocking, operation of additional units, management through fuel distribution.
- Driver’s identification (card, pendant).
- Engine blocking.
- Attachment hardware identification (via 1-wire).
- Driver and peripheral character transmission via RX485/1-wire.
- Shut-off valve control on fuel tank.
- Reading of RFID cards as well as external key IBUTTON DS1990.
- The maximum number of cards in the device’s memory is 1000 cards.
- The transmission of read codes is transmitted via RS485 (LLS and MATRIX protocols) interfaces as well as via 1-WIRE, simulating IBUTTON DS1990.
Technical specification
| Technical specification | 12-24 |
| Protection against voltage spikes | Մինչև 60 v |
| Interfaces | 1-Wire / RS-485 |
| Interfaces | It is possible to flexibly configure the redirection of read codes with LLS and MATRIX protocols. The device has a relay output- powerful switchable contacts. If the RFID card is in the base, the contacts are switched. It is possible to read, write, edit the cards of the device databases through USB-RS485 converters. RFID card LED display, as well as information exchange with external equipment. Sound signal when your card is detected, as well as additional sound prompts while working with cards. |
Fuel card reader ERF-01
Description
The RFID reader allows solving problems such as identification of characters of drivers and attachments. Based on it, various scenarios can be created: engine blocking, operation of additional units, management through fuel distribution.
- Driver’s identification (card, pendant).
- Engine blocking.
- Attachment hardware identification (via 1-wire).
- Driver and peripheral character transmission via RX485/1-wire.
- Shut-off valve control on fuel tank.
- Reading of RFID cards as well as external key IBUTTON DS1990.
- The maximum number of cards in the device’s memory is 1000 cards.
- The transmission of read codes is transmitted via RS485 (LLS and MATRIX protocols) interfaces as well as via 1-WIRE, simulating IBUTTON DS1990.
Technical specification
| Technical specification | 12-24 |
| Protection against voltage spikes | Մինչև 60 v |
| Interfaces | 1-Wire / RS-485 |
| Interfaces | It is possible to flexibly configure the redirection of read codes with LLS and MATRIX protocols. The device has a relay output- powerful switchable contacts. If the RFID card is in the base, the contacts are switched. It is possible to read, write, edit the cards of the device databases through USB-RS485 converters. RFID card LED display, as well as information exchange with external equipment. Sound signal when your card is detected, as well as additional sound prompts while working with cards. |